The system has been preinstalled and reconfigured for the use of Windows® XP. If there is any reason that you may be required to reload Windows® XP, please reinstall the drivers by following these recommended steps:

Finish the Windows® XP setup procedures (see Reinstalling Microsoft® Windows® XP).

• Drivers installing and Configuring:

• Chipset Utility

• Audio

• Modem

• LAN

• Video

• TouchPad

• PCMCIA Controller

• Hot-Key

• AutoMail

• PC Camera

• Wireless LAN Driver & Uitlity

• Bluetooth Driver & Utility

 

    Install Chipset utility:

1. Click Start at Desktop Windows, and then select Run… Click Browse… At Look in: select the CD/DVD-ROM drive with the Device Drivers and Utilities CD disk inserted. Double click the Drivers folder and then click the 00Chipset folder.

2. Select the Setup icon, click Open and then click OK

3. Follow the on-screen setup instructions to install the Drivers and Utility.

    Install Audio driver:

1. Click Start at Desktop Windows, and then select Run… Click Browse… At Look in: select the CD/DVD-ROM drive with the Device Drivers and Utilities CD disk inserted. Double click the Drivers folder and then click the 02Audio folder.

2. Select the Setup icon. Click Open and then click OK Click Next to continue installation and then click Finish to restart the computer when prompted.

3. Change Speaker type by clicking Start, select Control Panel and then double click on Sound Speech, and Audio icon. Double click the Sounds and Audio Devices at Sound, Speech, and Audio Properties. Click Advanced at Speakers settings, and then change Speaker Setup to 5.1 Surround Speakers

    Install Modem driver:

1. Click Start at Desktop Windows, and then select Run… Click Browse… At Look in: select the CD/DVD-ROM drive with the Device Drivers and Utilities CD disk inserted. Double click the Drivers folder and then click the 03Modem folder.

2. Select the Setup icon. Click Open and then click OK Click Next to continue installation and then click Finish. Click OK to restart the computer when prompted.

    Install LAN driver:

1. Click Start at Desktop Windows, and then select Run… Click Browse… At Look in: select the CD/DVD-ROM drive with the Device Drivers and Utilities CD disk inserted. Double click the Drivers folder and then click the 04LAN folder.

2. Double click Marvell folder. Select the SetupYukonWin icon. Click Open and then click OK Click Next to continue installation and then click Finish to restart the computer when prompted.

    Install Video driver:

1. Click Start at Desktop Windows, and then select Run… Click Browse… At Look in: select the CD/DVD-ROM drive with the Device Drivers and Utilities CD disk inserted. Double click the Drivers folder and then click the 01Vga folder

2. Double click ATIM26 folder for 5712 series. Or double click NVIDIA folder for 5722 series. Select Setup icon. Click Open and then click OK. Click Next to continue the installation, and then click Finish to restart the computer when prompted.

    Install Touch Pad Driver:

1. Click Start at Desktop Windows, and then select Run… Click Browse… At Look in: select the CD/DVD-ROM drive with the Device Drivers and Utilities CD disk inserted. Double click the Drivers folder and then click the 06TouchPad folder

2. Select Setup icon. Click Open and then click OK Click Next to continue installation and then click Finish to restart the computer when prompted.

     Install PCMCIA Controller_Card Reader driver:

1. Click Start at Desktop Windows, and then select Run… Click Browse… At Look in: select the CD/DVD-ROM drive with the Device Drivers and Utilities CD disk inserted. Double click the Drivers folder and then click the 07PCMCIA folder

2. Select Setup icon. Click Open and then click OK Click Next to continue installation and then click Finish to restart the computer when prompted.

    Install HotKey Application:

1. Click Start at Desktop Windows, and then select Run… Click Browse… At Look in: select the CD/DVD-ROM drive with the Device Drivers and Utilities CD disk inserted. Double click the Drivers folder and then click the AP-Key folder.

2. Select the Setup and click Open. Click OK to search for the driver and click Next to continue the installation. Click Finish and click Yes to restart the computer when prompted.

    Install AutoMail Application:

1. Click Start at Desktop Windows, and then select Run… Click Browse… At Look in: select the CD/DVD-ROM drive with the Device Drivers and Utilities CD disk inserted. Double click the Drivers folder and then click the 11AutoMail folder.

2. Select the Setup and click Open. Click OK to search for the driver and click Next to continue the installation. Click Finish and click Yes to restart the computer when prompted.

    Install PC Camera driver:

1. Insert the PC Camera Driver CD disk into the optical drive.

2. The auto run program will pop up. Click Next to continue installation and then click Finish. click Yes to restart the computer when prompted.

    Install Wireless LAN driver:

1. Power on the Wireless LAN module by toggle the Fn + F11 Key (see Figure 1).

2. Inserted the Intel PRO/Wireless Network Connection Software CD disk in to optical drive.

3. Select Install Software icon. Click NEXT and then click Next to continue installation

4. Click OK to Finish the installation.

 Install Bluetooth driver:

1. Power on the Bluetooth module by toggle the Fn + F11 key (see Figure 1).

2. Inserted the Intel Bluetooth Software CD disk in to optical drive.

3. Select Install button. Click OK to accept the license agreement and then click OK to continue installation. click Yes to restart the computer when prompted.